Components and Plugins: PCI functions to be used by components

Functions
int	hwloc_insert_pci_device_list (struct hwloc_backend *backend, struct hwloc_obj *first_obj)
unsigned	hwloc_pci_find_cap (const unsigned char *config, unsigned cap)
int	hwloc_pci_find_linkspeed (const unsigned char *config, unsigned offset, float *linkspeed)
int	hwloc_pci_prepare_bridge (hwloc_obj_t obj, const unsigned char *config)

Detailed Description

Function Documentation

int hwloc_insert_pci_device_list	(	struct hwloc_backend *	backend,
		struct hwloc_obj *	first_obj
	)

Insert a list of PCI devices and bridges in the backend topology.

Insert a list of objects (either PCI device or bridges) starting at first_obj (linked by next_sibling in the topology, and ending with NULL). Objects are placed under the right bridges, and the remaining upstream bridges are then inserted in the topology by calling the get_obj_cpuset() callback to find their locality.

unsigned hwloc_pci_find_cap	(	const unsigned char *	config,
		unsigned	cap
	)

Return the offset of the given capability in the PCI config space buffer.

This function requires a 256-bytes config space. Unknown/unavailable bytes should be set to 0xff.

int hwloc_pci_find_linkspeed	(	const unsigned char *	config,
		unsigned	offset,
		float *	linkspeed
	)

Fill linkspeed by reading the PCI config space where PCI_CAP_ID_EXP is at position offset.

Needs 20 bytes of EXP capability block starting at offset in the config space for registers up to link status.

int hwloc_pci_prepare_bridge	(	hwloc_obj_t	obj,
		const unsigned char *	config
	)

Modify the PCI device object into a bridge and fill its attribute if a bridge is found in the PCI config space.

This function requires 64 bytes of common configuration header at the beginning of config.