« Return to documentation listing
Table of Contents
shmem_double_min_to_all(3), shmem_float_min_to_all(3), shmem_int_min_to_all(3),
shmem_int4_min_to_all(3), shmem_int8_min_to_all(3), shmem_long_min_to_all(3),
shmem_longdouble_min_to_all(3), shmem_longlong_min_to_all(3), shmem_real4_min_to_all(3),
shmem_real8_min_to_all(3), shmem_real16_min_to_all(3), shmem_short_min_to_all(3)
 Performs a minimum function reduction across a set of processing elements
(PEs)
C or C++:
#include <mpp/shmem.h>
void shmem_double_min_to_all(double *target, const double *source,
int nreduce, int PE_start, int logPE_stride, int PE_size,
double *pWrk, long *pSync);
void shmem_float_min_to_all(float *target, const float *source,
int nreduce, int PE_start, int logPE_stride, int PE_size,
float *pWrk, long *pSync);
void shmem_int_min_to_all(int *target, const int *source,
int nreduce, int PE_start, int logPE_stride, int PE_size,
int *pWrk, long *pSync);
void shmem_long_min_to_all(long *target, const long *source,
int nreduce, int PE_start, int logPE_stride, int PE_size,
long *pWrk, long *pSync);
void shmem_longdouble_min_to_all(long double *target,
const long double *source, int nreduce, int PE_start,
int logPE_stride, int PE_size, long double *pWrk,
long *pSync);
void shmem_longlong_min_to_all(long long *target,
const long long *source, int nreduce, int PE_start, int logPE_stride,
int PE_size, long long *pWrk, long *pSync);
void shmem_short_min_to_all(short *target, const short *source,
int nreduce, int PE_start, int logPE_stride, int PE_size,
short *pWrk, long *pSync);
Fortran:
INCLUDE "mpp/shmem.fh"
INTEGER pSync(SHMEM_REDUCE_SYNC_SIZE)
INTEGER nreduce, PE_start, logPE_stride, PE_size
CALL SHMEM_INT4_MIN_TO_ALL(target, source, nreduce, PE_start,
& logPE_stride, PE_size, pWrk, pSync)
CALL SHMEM_INT8_MIN_TO_ALL(target, source, nreduce, PE_start,
& logPE_stride, PE_size, pWrk, pSync)
CALL SHMEM_REAL4_MIN_TO_ALL(target, source, nreduce, PE_start,
& logPE_stride, PE_size, pWrk, pSync)
CALL SHMEM_REAL8_MIN_TO_ALL(target, source, nreduce, PE_start,
& logPE_stride, PE_size, pWrk, pSync)
CALL SHMEM_REAL16_MIN_TO_ALL(target, source, nreduce, PE_start,
& logPE_stride, PE_size, pWrk, pSync)
The shared memory (SHMEM) reduction routines compute one or
more reductions across symmetric arrays on multiple virtual PEs. A reduction
performs an associative binary operation across a set of values. For a list
of other SHMEM reduction routines, see intro_shmem(3).
As with all SHMEM
collective routines, each of these routines assumes that only PEs in the
active set call the routine. If a PE not in the active set calls a SHMEM
collective routine, undefined behavior results.
The nreduce argument determines
the number of separate reductions to perform. The source array on all PEs
in the active set provides one element for each reduction. The results of
the reductions are placed in the target array on all PEs in the active
set. The active set is defined by the PE_start, logPE_stride, PE_size triplet.
The source and target arrays may be the same array, but they may not be
overlapping arrays.
The arguments are as follows:
 target
 A symmetric array
of length nreduce elements to receive the results of the reduction operations.
The data type of target varies with the version of the reduction routine
being called. When calling from C/C++, refer to the SYNOPSIS section for
data type information. When calling from Fortran, the target data types
are as follows:
 shmem_int4_min_to_all: Integer, with an element size of
4 bytes
 shmem_int8_min_to_all: Integer, with an element size of 8 bytes
 shmem_real4_min_to_all: Real, with an element size of 4 bytes
 shmem_real8_min_to_all:
Real, with an element size of 8 bytes
 shmem_real16_min_to_all: Real, with
an element size of 16 bytes
 source A symmetric array: of length nreduce
elements, that contains one
 element for each separate reduction operation.
The source argument must have the same data type as target.
 nreduce
 The
number of elements in the target and source arrays. nreduce must be of type
integer. If you are using Fortran, it must be a default integer value.
 PE_start
 The lowest virtual PE number of the active set of PEs. PE_start must be
of type integer. If you are using Fortran, it must be a default integer
value.
 logPE_stride
 The log (base 2) of the stride between consecutive virtual
PE numbers in the active set. logPE_stride must be of type integer. If you
are using Fortran, it must be a default integer value.
 PE_size
 The number
of PEs in the active set. PE_size must be of type integer. If you are using
Fortran, it must be a default integer value.
 pWrk
 A symmetric work array.
The pWrk argument must have the same data type as target. In C/C++, this
contains max(nreduce/2 + 1, _SHMEM_REDUCE_MIN_WRKDATA_SIZE) elements. In
Fortran, this contains max(nreduce/2 + 1, SHMEM_REDUCE_MIN_WRKDATA_SIZE)
elements.
 pSync
 A symmetric work array. In C/C++, pSync is of type long and
size _SHMEM_REDUCE_SYNC_SIZE. In Fortran, pSync is of type integer and size
SHMEM_REDUCE_SYNC_SIZE. If you are using Fortran, it must be a default integer
value. Every element of this array must be initialized with the value _SHMEM_SYNC_VALUE
(in C/C++) or SHMEM_SYNC_VALUE (in Fortran) before any of the PEs in the
active set enter the reduction routine.
The values of arguments nreduce,
PE_start, logPE_stride, and PE_size must be equal on all PEs in the active
set. The same target and source arrays, and the same pWrk and pSync work
arrays, must be passed to all PEs in the active set.
Before any PE calls
a reduction routine, you must ensure that the following conditions exist
(synchronization via a barrier or some other method is often needed to
ensure this): The pWrk and pSync arrays on all PEs in the active set are
not still in use from a prior call to a collective SHMEM routine. The target
array on all PEs in the active set is ready to accept the results of the
reduction.
Upon return from a reduction routine, the following are true
for the local PE: The target array is updated. The values in the pSync array
are restored to the original values.
The terms collective, symmetric,
and cache aligned are defined in intro_shmem(3). All SHMEM reduction routines
reset the values in pSync before they return, so a particular pSync buffer
need only be initialized the first time it is used.
You must ensure that
the pSync array is not being updated on any PE in the active set while
any of the PEs participate in processing of a SHMEM reduction routine. Be
careful of the following situations: If the pSync array is initialized
at run time, some type of synchronization is needed to ensure that all
PEs in the working set have initialized pSync before any of them enter
a SHMEM routine called with the pSync synchronization array. A pSync or
pWrk array can be reused in a subsequent reduction routine call only if
none of the PEs in the active set are still processing a prior reduction
routine call that used the same pSync or pWrk arrays. In general, this can
be assured only by doing some type of synchronization. However, in the special
case of reduction routines being called with the same active set, you can
allocate two pSync and pWrk arrays and alternate between them on successive
calls.
Example 1: This Fortran example statically initializes the
pSync array and finds the minimum value of real variable FOO across all
the even PEs.
INCLUDE "mpp/shmem.fh"
INTEGER PSYNC(SHMEM_REDUCE_SYNC_SIZE)
DATA PSYNC /SHMEM_REDUCE_SYNC_SIZE*SHMEM_SYNC_VALUE/
PARAMETER (NR=1)
REAL FOO, FOOMIN, PWRK(MAX(NR/2+1,SHMEM_REDUCE_MIN_WRKDATA_SIZE))
COMMON /COM/ FOO, FOOMIN, PWRK
INTRINSIC MY_PE
IF ( MOD(MY_PE(),2) .EQ. 0) THEN
CALL SHMEM_REAL8_MIN_TO_ALL(FOOMIN, FOO, NR, 0, 1, N$PES/2,
& PWRK, PSYNC)
PRINT *, ’Result on PE ’, MY_PE(), ’ is ’, FOOMIN
ENDIF
Example 2: Consider the following C/C++ call:
shmem_int_min_to_all( target, source, 3, 0, 0, 8, pwrk, psync );
The preceding call is more efficient, but semantically equivalent to,
the combination of the following calls:
shmem_int_min_to_all(&(target[0]), &(source[0]), 1, 0, 0, 8,
pwrk1, psync1);
shmem_int_min_to_all(&(target[1]), &(source[1]), 1, 0, 0, 8,
pwrk2, psync2);
shmem_int_min_to_all(&(target[2]), &(source[2]), 1, 0, 0, 8,
pwrk1, psync1);
Note that two sets of pWrk and pSync arrays are used alternately because
no synchronization is done between calls.
intro_shmem(3)
Table of Contents
« Return to documentation listing
